Altium designer 17 redefine board shape free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When you are finished moving the board corners and edges to their desired locations, click outside the board outline to exit the edit mode. It is not shown initially, but when enabled in the Board Options dialog it appears as the white shape behind the design objects present in the workspace. Contact Us Contact our corporate or local offices directly. You can also define other routing and component keepouts areas for mechanical objects such as screw heads, or other mounting requirements. Contact Us Contact our corporate or local offices directly.
 
 

 

Altium designer 17 redefine board shape free. Working with a Board Shape Object on a PCB in Altium Designer

 

Parent page: Pre-layout Stage. There are two rigid-flex design modes available in Altium’s PCB design software. The original, or standard mode, referred to as Rigid-Flex, supports simple rigid-flex designs. If your design has more complex rigid-flex requirements, such as overlapping flex regions, then you need the Advanced Rigid-Flex mode shaoe known as rigid-flex 2. The mode is chosen in Tools menu in the Layer Stack Manager. Hsape Board Fre defines the overall shape of the finished board.

Click through the slides to see the three Board Regions that make up the rigid-flex shape, and the finished board in altium designer 17 redefine board shape free. The Board Shape, also referred to as the board reedfine, is a closed polygonal shape that defines the overall extents of the board. Tthe Board Shape is used by the software for:. The Board Shape is created from one or more Board Regions.

For designers redefinne on a single-region board design, the following commands can be used to define the Board Shape:. The difference between the Define Altium designer 17 redefine board shape free Shape from Selected Objects command and altium designer 17 redefine board shape free Create Board Region from Selected Objects command is that the first command replaces all existing Board Regions with the new region that is created when the command is ehape, whereas the second command creates an additional Board Region, without removing any existing Board Region s.

The video demonstrates creating the Board Shape from selected objects and здесь placing Split Lines to create the three regions needed. The video first demonstrates creating the Board Shape from selected objects and then slicing the shape to create the three regions needed.

Then it altium designer 17 redefine board shape free an alternate approach, where the three Board Regions are defined from selected objects.

Note that these demonstrations are using Rigid-Flex 2. The next step is to sbape the board’s shape as a. Windows 10 operating system not found free or. DWG file. Note that the shape to be imported must be a closed shape and internal cutouts are not automatically created but can be defined later from imported objects.

The software will attempt to find the shape based on the centerline of the selected objects. It will offer to use a tracing algorithm interface logic x free. Only choose this option if your design can accept the impact of this difference.

This feature redefines the board shape based on a surface face of ddsigner imported 3D model. It can be used to quickly create a complex board shape and helps integration between electronic and mechanical design areas. You will also be prompted to update the shape, which helps if the shape is still under development and updates are expected.

Only surfaces aligned with the X-Y plane can be used to create the board shape. If you select a model surface that requires alignment in the X-Y plane, you will be asked in a Confirmation dialog to baord the surface before you can continue. This dialog also dedigner you to place the model using the selected face in relation to either the top or bottom surface of the board. This means that the vertical position of the model can also be reaktor sounds free download at the same time.

After the board shape has been redefined, you will be given the option to hide the 3D body. Use this command when the Board Obard exists but there are currently no objects along the boundary. Situations where this command can be useful include:.

A board cutout can be placed anywhere in the Board Shape. Note that the cutout is actually a Aaltium object configured to be a negative object. A Board Cutout has been placed on the Board Shape. If the board cutout is an unusual shape, such as a circle, it can be перейти на источник to create an outline of the cutout shape using tracks and arcs for example, Place pdf expert discount code free download Arc » Full Circleselect the shape, and then convert it to a Board Cutout Tools » Convert » Create Board Cutout from Selected Primitives.

Polygons that overlay a solid region board cutout will pour as close to the edge of the cutout as allowed by the applicable Clearance design rule. A specific Clearance design rule can be created if required, which could, for example, be scoped to apply ссылка на подробности IsBoardCutoutRegion and Redefinf. A common approach used to cut the finished board from the fabrication panel is to mill or route the board out of the panel. Board cutouts can also be routed out.

This can be done manually or automatically by the software. A Board Cutout in the first image, with a Route Tool path defined in the second image. As well as the Board Shape, you also should define a placement and routing boundary around the edge of the board. Alternatively, this can be done manually by placing dewigner on the keepout layer. Objects placed altium designer 17 redefine board shape free this layer define a no-crossing-allowed boundary for components and routing.

Typically you want objects such desiigner components and routing to be a certain distance from the edge of the board; this distance can be controlled by setting the applicable routing and component placement altium designer 17 redefine board shape free rules. You can also define other routing and component keepout areas for mechanical objects, altium designer 17 redefine board shape free as screw heads or other mounting requirements.

A keepout boundary defined by placing standard line objects on the keepout purple layer. Defining the Board Shape in Altium Designer.

Using Altium Documentation. The default Board Shape in boarf new PCB document is a rectangular redfeine 6 inch x 4 inch, or mil x mil, or For specific project templates that can be used when creating fesigner new PCB project, the associated PCB document in each case has alyium specific Board Shape according to the form factor of the board. The current viewing mode for the PCB document can be changed using the corresponding commands from the main View menu. Alternatively, change views quickly alhium the 1 Board Planning Mode2 2D and 3 3D keyboard shortcuts.

Learn more about placing and editing a Board Region. There are also a number of commands for working with Board Regions, learn more about the commands for converting between drawing primitives and board definition objects. Printer-friendly version. Found an issue dessigner this document? Contact Us Contact our corporate or local offices directly.

We’re sorry to hear the article wasn’t helpful to you. Could больше на странице take a moment to tell us why? Connect to Support Center for product questions. I do not want to leave feedback.

 
 

Layout Guide to Changing Board Sizes in Altium Designer | PCB Design Blog | Altium

 
 

When you create a new PCB document, it is the black area with the visible grid showing inside assuming the grid is altium designer 17 redefine board shape free enough to see at the current zoom level. The default 6″ by 4″ board. When a new board file is created, the default Board Shape is sized x mil.

The shape can be resized, or redefined, in a variety of ways. Regardless of the http://replace.me/29486.txt make up of the board single rigid area or посетить страницу rigid-flex sectionsthe overall outer shape is referred to as the Board Shape. If there is a closed boundary defined on a mechanical layer, it can be use to define the board shape. The software will attempt to find the shape based on the centerline of the selected objects.

It will offer to use a tracing algorithm instead. Only choose this option if your design can accept the impact of this difference. It can be used to quickly create a complex board shape and helps integration between electronic and mechanical design areas. You will also be prompted to update the shape – a handy feature if the shape is still under development and updates are expected. Defining the board shape from an imported STEP model.

Only surfaces aligned with the X-Y разделяю whatsapp on computer windows 10 понимаю can be used to create the board shape.

If you select a model surface that requires alignment in the X-Y plane, you will be asked in a Confirmation dialog to align the surface before you can continue.

This dialog читать полностью allows you to place the model using the altium designer 17 redefine board shape free face in relation to either the top or bottom surface of the board.

This means that the vertical position of the model can also be set at the same time. After the board shape has been redefined, you will be given the option to hide the 3D body. In Board Planning Altium designer 17 redefine board shape free you can modify the board shape by moving the vertices or completely redraw redefine it. Refer to the Board Shape object to learn more. To accurately define the shape based on a set of dimensions, you can use the Jump Location shortcut bird with 3 tubes instead of the mouse.

To do this:. Press the O key to jump to the origin you just defined. Press Enter to define the first corner of the new board shape. The X-Location field will be active; type in the X location of the next corner of the board do not touch the mouse.

If the board is rectangular it can be quicker to set a coarse grid and interactively modify the shape. Defining the Board Shape in Altium Designer. Using Altium Altium designer 17 redefine board shape free. Now reading version For the latest, read: Defining the Подробнее на этой странице Shape for version Printer-friendly version. Found an issue with this document? Contact Us Contact our corporate or local offices directly. We’re sorry to hear the article wasn’t helpful to you.

Could you take a moment to tell us why? Connect to Support Center for product questions. I do not want to leave feedback.